BAER SET HSS: Sechskant-Schneidmuttern: UNC 1/4 - 1/2"
In magazzino
BAER SET HSS: Sechskant-Schneidmuttern: UNC 1/4 - 1/2"
Dieses Gewindeschneiderset ist ein hochwertiger Satz für alle Bedürfnisse beim Außengewinde schneiden. Die metrischen Gewindeschneider von UNC1/4" bis UNC1/2" ermöglichen das Schneiden von Außengewinden.
Das Set enthält runde Schneideisen aus HSS-Stahl (High Speed Steel), was für lange Haltbarkeit und hohe Präzision beim Gewinde schneiden sorgt. Das Gewindeschneid-Sortiment wird in einer stabilen Kunststoff-Box geliefert. Die Schneideisen sind mit einer eigenen Aussparung in der Box fixiert.
Die Werkzeuge selbst zeichnen sich durch höchste Qualität aus. Sie sind optimal verarbeitet und garantieren lange Haltbarkeit sowie hohe Präzision beim Gewindeschneiden. Ob Sie ein Profi oder Heimwerker sind, mit diesem Set können Sie Ihr Außengewinde mühelos schneiden. Investieren Sie in Qualität und erleben Sie die Vorzüge eines professionellen Gewindeschneiders. Ein Gewindeschneider-Satz, der in keiner Werkstatt fehlen darf.
Dimensioni
| Diametro della filettatura |
1/4 - 1/2" |
|---|---|
| Dimensione |
UNC 1/4 - 1/2" |
Caratteristiche
| Direction |
Right |
|---|---|
| Filettatura standard |
UNC: American Unified National Coarse thread according to ANSI B1.1 |
| Gruppo di prodotti |
threading tool sets |
| Product type |
Threading tool sets |
Informazioni tecniche - Fustelle
1,5
2A
Impostazione contenuti
| Dadi da taglio esagonali BAER HSS | UNC 1/4 x 20 | UNC 5/16 x 18 UNC 3/8 x 16 | UNC 7/16 x 14 UNC 1/2 x 13 |
|---|
Applicazioni
- General-purpose use
- Materials with good machinability up to 900 N/mm²
- Unalloyed and low-alloy steels
- for manual use
HSS thread cutting dies - for perfect external threads
#runs round
BAER thread cutting dies are perfect for anyone who wants to cut external threads. Basically, this cutting tool is cylindrical and - depending on the size - has three or more cutting edges inside. The holes between the cutting edges receive the chips, roll them and discharge them. Thread cutting dies are used to cut screws, nuts and threaded rods in everyday use. Round thread cutting dies are cylindrical and are used for making external threads in one operation. There are four holes and a groove on the outer casing of the round thread cutting die, which are used to fix the die in suitable die stock and holders using retaining screws. External threads are cut by hand with die stocks. Special die holders are used for the tailstock on a lathe or for the chuck of a drill. The thread cutting die is made of high speed steel (HSS). HSS steel has a higher toughness and a lower susceptibility to breakage compared to HSSE steel. HSS steel is known for its exceptional cutting performance and durability. HSS round thread cutting dies can be used for a wide range of applications, such as structural steels, carbon steels and free-cutting steels. It is also suitable for case-hardening steels and unalloyed tempering steels with a strength of up to 750 N/mm². Cast steel as well as zinc alloys can also be cut with it, as well as pure copper, low-alloy copper, as well as short-chipping copper-tin alloys, plastics such as POM, PVC, etc. It is important that you lubricate the tool plumbed working and with cutting oil or cutting paste.
The advantages at a glance:
- little space required
- Adjustment without effort
- Use on simple and multi-spindle machines
- simple tool assembly
- Use from both sides
Technical information:
- DIN EN 22568 (formerly DIN 223 B)
- Thread tolerance: 2A
- Gate: 1,5
HSS thread cutting dies DIN 223 :
M 3 x 0.5 | M 4 x 0.7 | M 5 x 0.8 | M 6 x 1.0 | M 8 x 1.25 | M 10 x 1.5 | M 12 x 1.75