BAER HSSE-PM-TiAlN Machine Tap 45° SP - MF 16 x 1.5 - DIN 374 special alloys
In magazzino
BAER HSSE-PM-TiAlN Machine Tap 45° SP - MF 16 x 1.5 - DIN 374 special alloys
Our machine taps are powerful and reliable taps for efficient machining in one step with the machine. Machine taps are used especially in industrial manufacturing. They can be used in CNC machines, thread cutting machines, cordless drills and pneumatic tapping arms, among others. As they are characterised by high efficiency and low production costs, they are often used in series production. The thread is cut by machine in one operation. Thus, although the BAER machine tap can basically be compared with short machine taps, it is designed for use with the machine.
The machine tap can be used for blind holes, as the short chamfer and the spiral flutes ensure that the chip is discharged to the rear of the hole.
Every material shows individual chip behaviour. Therefore, screw taps must have the correct rake angle and - for even better results - a specially treated surface. This is the only way to ensure a good chip transport and to produce a thread that is true to gauge.
The high quality of the powder-metallurgical HSSE-PM steel we use ensures that our tools are extremely durable and robust. Due to special hardening processes and repeated tempering the hardness structure is very homogeneous, which forms the ideal basis for a genuine BAER screw taps. This increases the toughness and stability of the screw taps, allowing them to remain in use for longer.
The TiAlN coating is more resistant to friction and heat and therefore offers performance advantages at high temperatures, few cooling options (such as with small dimensions and deep holes) and faster cutting speeds (more than 60 m/min). TiAlN also has advantages when machining poorly machinable and wearable materials and can also be used dry to a limited extent. Recoating of TiAlN tools is possible up to 5 times without removing the old coating
Dimensioni
| Diametro della filettatura |
16 |
|---|---|
| Dimensione |
MF 16 x 1,5 |
| Inclinazione |
1,5 |
| Nominal Diametro della filettatura in inches |
0,63 |
| Nominal Diametro della filettatura in mm |
16 |
| Quadrato |
9 mm |
| Pitch in mm |
1,5 |
Caratteristiche
| Direction |
Right |
|---|---|
| Filettatura standard |
MF: Metric ISO fine thread according to DIN 13 |
| Gruppo di prodotti |
Screw taps |
| Materiale |
HSSE-PM TiAlN |
| Resistenza alla trazione a temperatura ambiente |
up to 1200 N/mm² | 38 HRC |
| Standard |
DIN 374 |
| Product type |
Machine taps |
| Tolerance |
ISO2/6H |
14.5 mm
Blind hole up to 2.5 x D
Form C 45° RSP
2-3 threads
Chips are removed upwards against the cutting direction
External cooling and lubrication
HSSE-PM TiAlN
up to 1200 N/mm² | 38 HRC
ISO2/6H
Applicazioni
- Special nickel alloys Incoloy 825, Inconel 718, Nimonic 75, Hastelloy X
- Stainless steels, INOX, V2A, V4A
- Difficult-to-machine materials up to a maximum of 1200 N/mm²
- Alloyed heat-treatable steels, nodular cast iron, malleable cast iron
- Cast aluminium and wrought alloys Si<5% (long-chipping)
- Copper alloys and brass (long-chipping)
- Thermosets and moulding materials
Esempi di applicazioni
- Oil drain plug thread MF16x1,5
- Oil drain plug thread for oil drain plugs M16x1.5
Disegno tecnico
| D1 |
MF 16 x 1.5 |
|---|---|
| D2 |
12 mm |
| Diametro della filettatura |
16 |
| L1 |
100 mm |
| L2 |
16 mm |
| Quadrato |
9 mm |
Applicazione - Materiali campione
| Leghe di nichel | Velocità di taglio vc in m/min | |
|---|---|---|
| 2.4858 | NiCr21Mo (Incoloy 825) | 4 - 6 |
| 2.4668 | NiCr19Fe19NbMo (Inconel 718) | 4 - 6 |
| 2.4630 | Ni-Cr20Ti (Nimonic 75) | 4 - 6 |
| 2.4665 | NiCr22Fe18Mo (Hastelloy X) | 4 - 6 |
| Acciai inossidabili (ferritici, austenitici, martensitici) | Velocità di taglio vc in m/min | |
|---|---|---|
| 1.4104 | X14CrMoS17 | 8 - 10 |
| 1.4301 | X5CrNi18-10 (V2A) | 8 - 10 |
| 1.4571 | X6CrNiMoTi17-12-2 (V4A) | 8 - 10 |
| 1.4505 | X12CrS13 | 5 - 7 |
| Acciai legati, acciai temprati e rinvenuti | Velocità di taglio vc in m/min | |
|---|---|---|
| 1.8515 | 31CrMo12 | 5 - 7 |
| 1.0503 | C45 | 20 - 25 |
| 1.7218 | 25CrMo4 | 5 - 20 |
| 1.6511 | 36CrNiMo4 | 5 - 20 |
| Ghisa sferoidale, ghisa malleabile | Velocità di taglio vc in m/min | |
|---|---|---|
| EN-JS-1030 | EN-GJS-450-15 (GGG45) | 15 - 20 |
| EN-JS-1070 | EN-GJS-700-2 (GGG70) | 15 - 20 |
| EN-JM-1010 | EN-GJMW-350-4 (GTW-35) | 15 - 20 |
| EN-JM-1145 | EN-GJMB-450-6 (GTS-45) | 15 - 20 |
| Alluminio puro, leghe di alluminio fuse e lavorate Si < 5% (lunghezza del truciolo) | Velocità di taglio vc in m/min | |
|---|---|---|
| Al99.5 | EN AW-1050 | 25 - 30 |
| AlMgSi | EN AW-6060 | 25 - 30 |
| AlZn5Mg3Cu | EN AW-7022 | 25 - 30 |
| AlMg5 | EN AC-51300 | 12 - 15 |
| Leghe di rame, ottone (a lungo taglio) | Velocità di taglio vc in m/min | |
|---|---|---|
| E-Cu 57 | EN CW450A | 12 - 15 |
| CuZn37 | EN CW 508 L (Ms58) | 12 - 15 |
Velocità di taglio vc [m/min] = (Diametro esterno * π * velocità) / 1000
Velocità di rotazione n [1/min] = (Velocità di taglio in m/min * 1000) / (Diametro esterno * π)
Programmazione della velocità di avanzamento [mm/min] = velocità * passo
Si prega di notare che le velocità di taglio sopra indicate sono indicative e devono essere regolate in base alla lubrificazione e all'azionamento.
Ulteriori informazioni
- MF - ISO metric fine thread DIN 13
- Designations, geometries and definitions on taps
- Thread tolerances of the internal thread
- Internal thread and core hole dimensions
- Tap Chamfer forms
- Comparison inch-mm
- Surface treatments on tapping tools
- Cutting speeds and lubrication/cooling
- Information about tapping
- Material table