BAER ULTRA SET HSS Handgewindebohrer | Schneideisen | Werkzeuge | Schneidpaste: M 3 - 12
In magazzino
BAER ULTRA SET HSS Handgewindebohrer | Schneideisen | Werkzeuge | Schneidpaste: M 3 - 12
Umweltfreundliche Box
Vollsortiment von M 3 - M 12
Profi Gewinde-Werkzeugkoffer der absoluten Spitzenklasse
- KOMPROMISSLOS - Der Satz für alle, die höchste Qualität suchen. Ein Satz, der im besten Fall vererbt werden kann, da alle Werkzeuge von höchster Qualität in Werkstoffen, Schliffbild und Ideen sind
- INNOVATIV - Für gerades Ansetzen haben alle Vorschneider der 3-teiligen Handgewindebohrer-Sätze eine Führungsnase. Schiefes Gewinde zu schneiden, ist die häufigste Ursache für Werkzeugbruch. Mit diesen Gewindebohrern ist schiefes Gewindeschneiden unmöglich
- REIBUNGSLOS - Mittels Schneideisenführungen aus gedrehtem und vaporisiertem Automatenstahl wird auch der Bolzen so geführt, dass immer gerade geschnitten wird. Das schont das Schneideisenorm und die Gewinde werden immer gerade
- KONKURRENZLOS - Uns ist kein Marktbegleiter bekannt, der einen solchen Satz in dieser Ausführung, Qualität und mit diesen Innovationen für den Endanwender anbietet
- BAERENSTARK - Hier kaufen Sie einen Gewindeschneid-Satz der Extraklasse. Perfekt angeordnete Gewindeschneider im stylishen Werkzeug-Koffer. Komplett logisch aufgebaut sind die passenden Kernlochbohrer und Haltewerkzeuge sofort griffbereit
- VIELSEITIG - Dieses Profi-Gewindeschneidset eignet sich für die unterschiedlichsten Gewindebearbeitungen und besticht durch geprüfte BAER-Qualität
- FLEXIBEL - Gewindeschneider Set zur Herstellung von Innengewinden & Außengewinden. Dank der Haltewerkzeuge wird effektives und präzises Bohren gewährleistet
- NACHHALTIG - Werkzeug-Box aus Glukose, natürlichen Wachsen, Mineralien und natürlichen Fasern | geschlossener CO₂-Kreislauf und recycelbar - Schluss mit Plastikkoffern!
BAER ULTRA - Aus Liebe zum Werkzeug und Handwerk
Echte Innovationen, die das Gewindeschneiden erleichtern
#In echt noch schöner
Von Liebhabern für Liebhaber. Dieser Gewindeschneiderset wurde von Grund aus neu entwickelt, um auf Eure Bedürfnisse einzugehen und nicht nur die Gewindeschneidwerkzeuge als Hochleistungswerkzeuge zu präsentieren, sondern von der Box aus, bis hin zu kleinsten Zubehörteilen in einer einzigartigen, langlebigen Qualität auszustatten.
Ein Koffer voller Innovationen und Profiwerkzeuge:
- - Die Vorschneider mit Führungsnase der 3-teiligen Handgewindebohrer-Sätze sind eine echte Besonderheit. Sie sorgen dafür, dass auch an den kniffligsten Stellen immer lotrechte Gewinde geschnitten werden. Schiefes Gewindeschneiden ist eine der häufigsten Ursachen für Werkzeugbruch. Mit diesen Sätzen passiert das nicht mehr.
- - Schneideisenführung aus gedrehtem, vaporisiertem Automatenstahl sorgen für lotgerechtes Gewindescheiden von Außengewinden.
- - Passende Schneidpaste ist ebenso im Satz enthalten. Diese kommt ohne Erdöl, Schwefel und Chlor aus und ist auf Seifen-Wasser-Basis. Schmiert hervorragend, ist aber wesentlich ökologischer als Wettbewerberprodukte.
- - Gebrauchsanweisung mit wertvollen Tipps zum Gewindeschneiden im Satz enthalten
- - Windeisen und Schneideisenhalter sind aus sehr hochwertigem und feinen Zinkdruckguss, wodurch sie mehr Drehmomente aushalten und besser verarbeitet sind als herkömmliche Haltewerkzeuge. Hinzu noch im schicken rot-schwarzen Design.
- - In einem Koffer, der ohne Plastik auskommt, sondern in Deutschland aus Glukose, natürlichen Wachsen, Mineralien und natürlichen Fasern besteht und damit recycelbar ist. Lediglich die Schaumstoffeinlagen enthalten Plastik.
Dimensioni
| Diametro della filettatura |
3 - 12 |
|---|---|
| Dimensione |
M 3 - 12 |
Caratteristiche
| Direction |
Right |
|---|---|
| Filettatura standard |
M: Metric ISO standard thread according to DIN 13 |
| Gruppo di prodotti |
threading tool sets |
| Materiale |
HSSG bright |
| Resistenza alla trazione a temperatura ambiente |
up to 900 N/mm² | 27.1 HRC |
| Product type |
Threading tool sets |
| Tolerance |
ISO2/6H |
Informazioni tecniche - Maschi a vite
Through hole and blind hole up to 2 x D
Form C straight fluted
2-3 threads
see illustration
External cooling and lubrication
HSSG bright
up to 900 N/mm² | 27.1 HRC
ISO2/6H
Informazioni tecniche - Fustelle
1,5
ISO-6g
Impostazione contenuti
| Set di maschietti a mano BAER Ultra HSSG da 3 pezzi (n. 1 con naso pilota) | M 3 x 0,5 | M 4 x 0,7 | M 5 x 0,8 M 6 x 1,0 | M 8 x 1,25 | M 10 x 1,5 M 12 x 1,75 |
|---|---|
| Filiera tonda BAER HSS | M 3 x 0,5 | M 4 x 0,7 | M 5 x 0,8 M 6 x 1,0 | M 8 x 1,25 | M 10 x 1,5 M 12 x 1,75 |
| Punta per carotaggio BAER HSSG | 2,5 mm | 3,3 mm | 4,2 mm | 5,0 mm 6,8 mm | 8,5 mm | 10,2 mm |
| Chiave per stampi regolabile BAER PRO | No. 1: M 1-8 | 1/16-1/4 No. 2: M 4-12 | 5/32-1/2 | G 1/8 |
| Portafustelle BAER PRO | 20 x 5 | 20 x 7 | 25 x 9 | 30 x 11 38 x 14 |
| Guide per stampi PRO | M 3 x 0,5 | M 4 x 0,7 | M 5 x 0,8 M 6 x 1,0 | M 8 x 1,25 | M 10 x 1,5 M 12 x 1,75 |
| Lubrificante | Pasta da taglio ecologica ad alte prestazioni 100 ml |
| Portautensili corto BAER con cricchetto | M 3-10 M 5-12 |
| accessori | Cacciavite / calibro per filettatura metrica / istruzioni / suggerimenti per la filettatura |
Applicazioni
- General construction steels
- Free-cutting steels
- Case-hardening steels
- Unalloyed heat-treatable steels
- Pure copper
- low-alloyed copper
- Copper-tin alloy (bronze) short-chipping
- materials with good machinability up to 900 N/mm²
Ulteriori informazioni
- M - Metric ISO thread DIN 13
- Information about tapping
- Designations, geometries and definitions on taps
- Thread tolerances of the internal thread
- Internal thread and core hole dimensions
- Tap Chamfer forms
- Cutting speeds, lubrication and cooling for taps
- Thread tolerances of external threads
- Bolt pre-machining diameter
Sicherheitshinweise
For the sake of the environment - made from renewable raw materials
#Tool heroes with responsibility
We are committed to our fellow human beings and to future generations. In line with the neo-ecology megatrend, we focus our actions on the intelligent and sustainable use of resources. For us, sustainability is a value system that shows the highest respect for people and the environment. That is why we have chosen a sustainable and stable solution: the tool box made of glucose, natural waxes, minerals and natural fibres. The carbon needed for its production is extracted from the CO₂ in the atmosphere. Subsequent thermal recycling is thus CO₂-neutral, the CO₂ cycle is closed. The tool box are fully recyclable, so that valuable raw materials are retained in the material cycle.
HSSG twist drill bit for core hole drilling
#You can't do without it
Almost every do-it-yourselfer has worked with them: the classic drilling tools for cordless screwdrivers, drills, impact drills or hammer drills. Decisive for the field of application of the drill is not only the material, but also the cutting edge geometry, the rake angle and the spiral angle, the so-called twist. The drills are suitable for steel, cast steel, grey cast iron, malleable cast iron, nodular cast iron, sintered iron, nickel silver and graphite and are also suitable for precise and fast work due to their ground drill point. The core hole drillings are essential for cutting a internal thread afterwards.
HSSG core drill bit DIN 338 for M 3 - M 12:
Ø 2.5 mm (M 3) | Ø 3.3 mm (M 4) | Ø 4.2 mm (M 5)| Ø 5.0 mm (M 6) | Ø 6.8 mm (M 8) | Ø 8.5 mm (M 10) | Ø 10.2 mm (M 12)
ULTRA hand taps - nothing can go wrong
#unbreakable
The taper tap (No. 1) with guide nose of the 3-part hand tap sets are a real speciality. They ensure that perpendicular threads are always cut, even in the trickiest places. Crooked thread cutting is one of the most common causes of tool breakage. With these sets, that no longer happens. The advantage of multi-part hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) takes 65 per cent of the thread profile, the intermediate Tap (No. 2) 85 per cent and the finishing tap (No. 3) 100 per cent. This makes it easier to cut a straight and clean thread by hand.
Ultra HSSG hand tap- sets (3-piece) DIN 352 - taper tap (No. 1) with guide tang:
M 3 x 0.5 | M 4 x 0.7 | M 5 x 0.8 | M 6 x 1.0 | M 8 x 1.25 |M 10 x 1.5 | M 12 x 1.75
HSS thread cutting dies - for perfect external threads
#runs round
These high performance dies are made from high speed steel HSS. The holes between the cutting edges take the chips, roll them and carry them away. The die has outer and inner teeth. The flattened outer teeth make it easier to cut, reduce wear and thus increase the tool life time. Each tooth takes a chip of the same width with it when cutting. The inner teeth do not have a cutting function: in the cut part of the thread they serve as straight guides. The symmetrical design allows cutting in both axial directions.
HSS thread cutting dies DIN 223
M 3 x 0.5 | M 4 x 0.7 | M 5 x 0.8 | M 6 x 1.0 | M 8 x 1.25 |M 10 x 1.5 | M 12 x 1.75
PRO adjustable tap wrench - custom-fit holding tools for screw tap
#fits like a glove
The PRO adjustable tap wrench is an actuating tool for screw tap made from a high-end zinc die casting body, with which internal thread can be cut by hand. The outstanding quality of the tap wrench is not only in the material, but also in the premium clamping jaws, the handles and the geometry, which make the tool extremely stable and very precise to use. The long levers on the right and left help to cut plumb into the hole and easily apply the required torque. Another advantage is the easy handling and the short changing times. A lever can be turned off on one side to be able to work in hard-to-reach situations.
PRO adjustable tap wrenches DIN 18140
No. 1: M 1 - M 10
No. 2: M 4 - M 12
PRO die stock with die guides - it doesn't get any better than this
#tool perfectionists
Our PRO die stocks are made of high-end zinc die casting. They have a very stable design and are therefore very resilient, wear-resistant and accurate. With screws you fix the die in a suitable holder and thus prevent it from twisting during use. In addition, the design allows the use of the included die guides. The PRO die guides are made of free-cutting steel with an oxidised surface. This makes them a better fit, more stable and more durable than ever before. They provide optimum guidance for cutting a plumb external thread. When using them, it is important that the holes in the guide overlap with the holes in the die to ensure chip removal.
PRO die stocks DIN 22568
20 x 5 mm (M 3 - M 4) | 20 x 7 mm (M 5 - M 6) | 25 x 9 mm (M 8) | 30 x 11 mm (M 10) | 38 x 14 mm (M 12)
Tool ratchets - thread cutting with ratchet
#as in no time at all
We offer you the operating tool with ratchet in proven BAER quality. To clamp the screw tap, the chuck can be easily turned open and closed. With the lever you can set the chuck to clockwise or anti-clockwise rotation. The ratchet function of the tool ratchet is particularly practical when you need to cut the thread in tight situations. Tapping is a breeze with it.
Tool ratchets with ratchet function for screw tap
No. 1: M 1 - M 10
No. 2: M 4 - M 12
Cutting paste - for lubricating and cooling
#stay cool
Cutting pastes contribute to the cooling of drills, taps and dies. By adding a lubricant during cutting operations, you reduce the temperature, which in turn significantly extends tool life. It also reduces friction between the tool and the workpiece and thus wear and corrosion. This makes efficient and economical work possible. The BAER high-performance cutting paste with high-quality pressure additives achieves an excellent lubricating effect and is indispensable at thread cutting. The paste adheres to the cutting edges and only becomes liquid when used. As it does not contain any additives such as petroleum, chlorine or sulphur, it is extremely environmentally friendly.
High-performance cutting paste 100 ml
Accessories - like a car without a radio
#toollove
Who would want to do without valuable accessories? A tool lover certainly not. With the perfect accessories, this threading set becomes what it is: a masterpiece and all-rounder for tool lovers. If you try it once, you will never want to work with anything else again. With the thread template, you can determine the pitch of an existing external thread (e.g. a screw) and then cut a suitable internal thread with the correct screw tap. The included screwdriver can be used to tighten and loosen the screws of the die guides. Everything you need in one place, immediately to hand, clearly sorted in an environmentally friendly box.
Quality for generations
#Heirloom #Masterpiece
Are you looking for a high quality and sustainable tap set with dies and accessories? Then our BAER ULTRA tap set is exactly what you need! Our taps are made of the best material and guarantee you a precise and long-lasting cutting experience. Our threading tools are ground with the greatest care to guarantee you a perfect grinding pattern and a long service life. Convince yourself of our masterpiece. Look forward to only working with tools of the best quality and complete your workshop assortment with a set that, in the best case, can be inherited. Since all tools comply with the common DIN standards, replacement purchases or extensions to the assortment are possible at any time. We always recommend our customers to buy standard DIN tools, as this way the holding tools will also fit other taps and dies and repeat purchases will always be possible.
Accessories
In magazzino
Per questo prodotto è possibile anche la spedizione espressa
In magazzino
Per questo prodotto è possibile anche la spedizione espressa
In magazzino
Per questo prodotto è possibile anche la spedizione espressa
In magazzino
Per questo prodotto è possibile anche la spedizione espressa
In magazzino
Per questo prodotto è possibile anche la spedizione espressa
In magazzino
Per questo prodotto è possibile anche la spedizione espressa
In magazzino
Per questo prodotto è possibile anche la spedizione espressa
In magazzino
Per questo prodotto è possibile anche la spedizione espressa
In magazzino
Per questo prodotto è possibile anche la spedizione espressa