BAER SET HSS groß: Handgewindebohrer | Schneideisen | Werkzeuge : M 3 - 12
In magazzino
Per questo prodotto è possibile anche la spedizione espressa
BAER SET HSS groß: Handgewindebohrer | Schneideisen | Werkzeuge : M 3 - 12
Dieses Gewindeschneiderset ist ein hochwertiger und vielseitiger Satz für alle Bedürfnisse beim Gewinde schneiden. Die metrischen Gewindeschneider von M3 bis M12 ermöglichen das Schneiden von Innengewinden und Außengewinden. Unter anderem enthält dieser Satz auch die seltenen Zwischengrößen M7 und M9
Das Set enthält dreiteilige Handgewindebohrer-Sätze aus geschliffenem HSS-Stahl (High Speed Steel), was für lange Haltbarkeit und hohe Präzision sorgt. Außerdem sind HSS Schneideisen im Set enthalten, damit Sie jedes Gewinde problemlos schneiden können.
Das besondere Highlight dieses Sets ist die wunderschöne und langlebige Holzbox, die aus hochwertiger Buche hergestellt wird. Die Einlegefächer für die Gewindebohrer, Schneideisen, Windeisen und Schneideisenhalter sind passgenau ins Holz gefräst. Der Holzkasten ist so konzipiert, dass er durch seine stabile Bauform auch schwere Werkzeuge sicher und problemlos aufbewahren kann und dennoch alle Werkzeuge übersichtlich griffbereit liegen.
Die Werkzeuge selbst zeichnen sich durch höchste Qualität aus. Sie sind optimal verarbeitet und garantieren lange Haltbarkeit sowie hohe Präzision beim Gewindeschneiden. Ob Sie ein Profi oder Heimwerker sind, mit diesem Set können Sie jedes Innengewinde mühelos schneiden.
Zusammenfassend bietet dieses Gewindeschneider-Set eine hervorragende Lösung für alle, die Gewinde schneiden möchten. Die Kombination aus hochwertigen Werkzeugen und einer stabilen Holzbox macht es zu einer optimalen Wahl für Profis und Heimwerker gleichermaßen. Investieren Sie in Qualität und erleben Sie die Vorteile eines professionellen Gewindeschneider-Sets. Ein Gewindeschneider-Satz den jeder in seiner Werkstatt braucht.
Dimensioni
| Diametro della filettatura |
3 - 12 |
|---|---|
| Dimensione |
M 3 - 12 |
Caratteristiche
| Direction |
Right |
|---|---|
| Filettatura standard |
M: Metric ISO standard thread according to DIN 13 |
| Gruppo di prodotti |
threading tool sets |
| Materiale |
HSSG bright |
| Resistenza alla trazione a temperatura ambiente |
up to 900 N/mm² | 27.1 HRC |
| Product type |
Threading tool sets |
| Tolerance |
ISO2/6H |
Informazioni tecniche - Maschi a vite
Through hole and blind hole up to 2 x D
Form C straight fluted
2-3 threads
see illustration
External cooling and lubrication
HSSG bright
up to 900 N/mm² | 27.1 HRC
ISO2/6H
Informazioni tecniche - Fustelle
1,5
ISO-6g
Impostazione contenuti
| Set di maschietti a mano BAER HSSG da 3 pezzi | M 3 x 0,5 | M 4 x 0,7 | M 5 x 0,8 M 6 x 1,0 | M 7 x 1,0 | M 8 x 1,25 M 9 x 1,25 | M 10 x 1,5 | M 11 x 1,5 M 12 x 1,75 |
|---|---|
| Matrici tonde BAER HSS | M 3 x 0,5 | M 4 x 0,7 | M 5 x 0,8 M 6 x 1,0 | M 7 x 1,0 | M 8 x 1,25 M 9 x 1,25 | M 10 x 1,5 | M 11 x 1,5 M 12 x 1,75 |
| Chiave per maschietti regolabile di BAER | No. 1: M 1-10 | 1/16-3/8 | G 1/8 No. 2: M 4-12 | 5/32-1/2 | G 1/8 |
| Portafustelle rotonde BAER (diametro x altezza in mm) | 20 x 5 | 20 x 7 | 25 x 9 | 30 x 11 38 x 14 |
Applicazioni
- General-purpose use
- Materials with good machinability up to 900 N/mm²
- Unalloyed and low-alloy steels
- for through hole and blind hole
- for manual use
Applicazione - Campioni di materiali per i maschi
| Allgemeine Baustähle | |
|---|---|
| 1.0035 | S 185 (St 33) |
| 1.0036 | S 235 JRH |
| 1.0039 | S 235JRG1+CR |
| 1.0060 | E 335 (St 60-2) |
| Acciai a taglio libero | |
|---|---|
| 1.0718 | 11SMnPb30 |
| 1.0721 | 10S20 |
| 1.0726 | 35S20 |
| 1.0758 | 60SPb20 |
| Acciai da cementazione | |
|---|---|
| 1.0401 | (C15) |
| 1.7016 | 17 CR3 |
| 1.7131 | 16MnCr5 |
| 1.5919 | 15CrNi6 |
| Acciai temprati e rinvenuti non legati | |
|---|---|
| 1.0402 | C 22 |
| 1.1151 | C22E (Ck22) |
| 1.0503 | C 45 |
| 1.1191 | C45E (Ck45) |
| Rame puro, rame a bassa lega | |
|---|---|
| 2.0240 | CuZn15 |
| 2.0265 | CuZn30 |
| Lega di rame-stagno (bronzo) a taglio corto | |
|---|---|
| 2.1090.01 | G-CuSn7ZnPb |
| 2.1086.01 | G-CuSn10Zn |
| Plastica | |
|---|---|
| PMMA | |
| POM | |
| PVC | |
Ulteriori informazioni
- M - Metric ISO thread DIN 13
- Information about tapping
- Designations, geometries and definitions on taps
- Thread tolerances of the internal thread
- Internal thread and core hole dimensions
- Tap Chamfer forms
- Cutting speeds, lubrication and cooling for taps
- Thread tolerances of external threads
- Bolt pre-machining diameter
Sicherheitshinweise
Hand tap- sets - a problem shared is a problem halved
#Teamwork
thread cutting with hand tap sets is the proven and traditional method to cut an ideal internal thread by hand. The hand tap sets sets are 3-piece, manufactured according to DIN 352 and are suitable for cutting a metric ISO standard thread. These taps have a square shank, manufactured according to DIN10 and are especially suitable for use in tap wrenches or holding tools. This allows you to cut internal thread by hand without jamming. The reduced force on each individual screw tap is also an advantage, as it reduces the risk of breakage. It is easier for the user to cut straight into the hole, giving better control in the thread cutting process. A set consists of taper tap (No. 1), intermediate Tap (No. 2) and finishing tap (No. 3). All three share the work of tapping as follows:
- Taper tap (No. 1) (1 ring on shank): Form A, chamfer: 5-6 threads, removes 65% of the thread profile
- Intermediate Tap (No. 2) (2 rings on the shank): Form D, chamfer: 3-4 threads, removes 85 % of the thread profile
- Finishing tap (No. 3) (no ring on the shank): Form C, chamfer: 2-3 threads, removes 100% of the thread profile
The advantages at a glance:
- lower force effect on each individual screw tap → lower risk of breakage
- better control during the thread-cutting process
- for use in tap wrenches or holding tools
HSSG hand tap- sets (3-piece) DIN 352:
M 3 x 0.5 | M 4 x 0.7 | M 5 x 0.8 | M 6 x 1.0 | M 7 x 1.0 | M 8 x 1.25 | M 9 x 1.25 | M 10 x 1.5 | M 11 x 1.5 | M 12 x 1.75
HSS thread cutting dies - for perfect external threads
#round runs
BAER dies are used to produce metric external threads with a round external profile. You want to operate it by hand or by machine? Both works. These BAER dies, made of high-performance high-speed steel HSS, are suitable for normal applications for various materials with a strength of up to 800 N/mm². These include the following materials: general structural steels, free-cutting steels, case-hardening steels, unalloyed heat-treatable steels, pure copper, low-alloyed copper and copper-tin alloy (bronze) short-chipping, as well as plastics. The symmetrical design allows cutting in both axial directions. There are holes on the outside, here you can fix the thread cutting die in the die stock and prevent it from twisting during use. The chip holes, which are holes or cavities between the cutting edges, provide the chip transport. They take up the chips, roll them and carry them away. It is important that you lubricate the tool plumbed working and with cutting oil or cutting paste. Our thread cutting dies for external threads can convince primarily with excellent quality in addition to a fair price. BAER cutting dies - for perfect external threads.
The advantages at a glance:
- little space required
- Adjustment without effort
- Use on simple and multi-spindle machines
- simple tool assembly
- Use from both sides
Technical information:
- DIN EN 22568 (formerly DIN 223 B)
- Thread tolerance: ISO-6g
- Gate: 1,5
HSS thread cutting dies DIN 223 :
M 3 x 0.5 | M 4 x 0.7 | M 5 x 0.8 | M 6 x 1.0 | M 7 x 1.0 | M 8 x 1.25 | M 9 x 1.25 | M 10 x 1.5 | M 11 x 1.5 | M 12 x 1.75
PRO adjustable tap wrench - custom-fit holding tools for screw tap
#fits like a glove
The PRO adjustable tap wrench is an actuating tool for screw tap made from a high-end zinc die casting body, with which internal thread can be cut by hand. The outstanding quality of the tap wrench is not only in the material, but also in the premium clamping jaws, the handles and the geometry, which make the tool extremely stable and very precise to use. The long levers on the right and left help to cut plumb into the hole and easily apply the required torque. Another advantage is the easy handling and the short changing times. A lever can be turned off on one side to be able to work in hard-to-reach situations.
PRO adjustable tap wrenches DIN 18140
No. 1: M 1 - M 10 | 1/16-3/8 | G 1/8
No. 2: M 4 - M 12 | 5/32-1/2 | G 1/8
PRO die stock with die guides - it doesn't get any better than this
#tool perfectionists
Our PRO die stocks are made of high-end zinc die casting. They have a very stable design and are therefore very resilient, wear-resistant and accurate. With screws you fix the die in a suitable holder and thus prevent it from twisting during use. In addition, the design allows the use of the included die guides. The PRO die guides are made of free-cutting steel with an oxidised surface. This makes them a better fit, more stable and more durable than ever before. They provide optimum guidance for cutting a plumb external thread. When using them, it is important that the holes in the guide overlap with the holes in the die to ensure chip removal.
PRO die stocks DIN 22568
20 x 5 mm | 20 x 7 mm | 25 x 9 mm | 30 x 11 mm | 38 x 14 mm
