BaerCoil Wire Thread Inserts M 3 x 0.5 - 1.5 D (4.5 mm) - free running - Inconel X750 - 10 pcs.
In magazzino
Per questo prodotto è possibile anche la spedizione espressa
BaerCoil Wire Thread Inserts M 3 x 0.5 - 1.5 D (4.5 mm) - free running - Inconel X750 - 10 pcs.
BaerCoil® wire thread inserts are the perfect solution for a long-lasting, powerful thread connection and scrap recovery. They also create load-bearing connections in materials with low shear strength and are precise and wear-resistant. wire thread inserts are often used in automotive, electrical engineering, medical technology, lightweight construction and aerospace.
The BaerCoil® thread insert is the perfect solution for damaged threads. For thread repair with wire thread inserts, the thread is drilled out and a new STI thread (screw thread insert) for the wire thread insert is cut.
BaerCoil® thread inserts ensure optimum power transmission from the bolt to the nut thread, even in lightweight constructions. Today, they are already an important component in aviation and vehicle construction. They save weight and allow the use of smaller and shorter bolted joints.
BaerCoil® thread inserts can be shortened, according to the required length, with a side cutter or similar.
Dimensioni
| Diametro della filettatura |
3 |
|---|---|
| Dimensione |
M 3 x 0,5 |
| Inclinazione |
0,5 |
| Lunghezza |
1,5 D |
| T (Lunghezza quando è installato) |
4,5 mm |
| Calcolo della lunghezza della filettatura |
1.5 D means 1.5 times the diameter: 1.5 times 3 mm=4.5 mm
The nominal diameter for M 3 is 3 mm |
Caratteristiche
| Direction |
Right |
|---|---|
| Filettatura standard |
M: Metric ISO standard thread according to DIN 13 |
| Gruppo di prodotti |
Wire thread inserts |
| Materiale |
Inconel X750 (NiCr15Fe7TiAl, material no.: 2.4669) |
| Resistenza alla trazione a temperatura ambiente |
>1150 N/mm² |
| Product type |
BaerCoil wire thread inserts |
| Tolerance |
ISO2/6H |
| Type |
free running |
| Resistenza alla temperatura |
550°C long-term 750°C short-term |
Applicazioni
- Aerospace
- Turbocharger
- Aircraft engines
- Turbines
- Thermal power plants
Attributi
- high thermal resistance
- high corrosion protection
Disegno tecnico
| Diametro della filettatura |
3 |
|---|---|
| F (diametro esterno min. - max. prima dell'installazione) |
3,60 mm - 4,35 mm |
| Lunghezza |
1,5 D |
| T (Lunghezza quando è installato) |
4,5 mm |
| P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
| B (thread depth with chamfer) |
6,25 mm |
| D (minimum depth of the core hole, without tip) |
6,75 mm |