BaerCoil Wire Thread Inserts M 3 x 0.5 - 1.5 D (4.5 mm) - free running - Inconel X750 - 100 pcs.
In magazzino
Per questo prodotto è possibile anche la spedizione espressa
BaerCoil Wire Thread Inserts M 3 x 0.5 - 1.5 D (4.5 mm) - free running - Inconel X750 - 100 pcs.
BaerCoil® wire thread inserts are the perfect solution for a long-lasting, powerful thread connection and scrap recovery. They also create load-bearing connections in materials with low shear strength and are precise and wear-resistant. wire thread inserts are often used in automotive, electrical engineering, medical technology, lightweight construction and aerospace.
The BaerCoil® thread insert is the perfect solution for damaged threads. For thread repair with wire thread inserts, the thread is drilled out and a new STI thread (screw thread insert) for the wire thread insert is cut.
BaerCoil® thread inserts ensure optimum power transmission from the bolt to the nut thread - even in lightweight constructions. Due to their flexibility, they can compensate for pitch and angle errors and thus guarantee optimal force transmission. BaerCoil® thread inserts are already important components in the aerospace and automotive industries and help to reduce carrier material and use smaller, shorter bolted joints.
BaerCoil® thread inserts can be shortened, according to the required length, with a side cutter or similar.
Dimensioni
| Diametro della filettatura |
3 |
|---|---|
| Dimensione |
M 3 x 0,5 |
| Inclinazione |
0,5 |
| Lunghezza |
1,5 D |
| T (Lunghezza quando è installato) |
4,5 mm |
| Calcolo della lunghezza della filettatura |
1.5 D means 1.5 times the diameter: 1.5 times 3 mm=4.5 mm
The nominal diameter for M 3 is 3 mm |
Caratteristiche
| Direction |
Right |
|---|---|
| Filettatura standard |
M: Metric ISO standard thread according to DIN 13 |
| Gruppo di prodotti |
Wire thread inserts |
| Materiale |
Inconel X750 (NiCr15Fe7TiAl, material no.: 2.4669) |
| Resistenza alla trazione a temperatura ambiente |
>1150 N/mm² |
| Product type |
BaerCoil wire thread inserts |
| Tolerance |
ISO2/6H |
| Type |
free running |
| Resistenza alla temperatura |
550°C long-term 750°C short-term |
Applicazioni
- Aerospace
- Turbocharger
- Aircraft engines
- Turbines
- Thermal power plants
Attributi
- high thermal resistance
- high corrosion protection
Disegno tecnico
| Diametro della filettatura |
3 |
|---|---|
| F (diametro esterno min. - max. prima dell'installazione) |
3,60 mm - 4,35 mm |
| Lunghezza |
1,5 D |
| T (Lunghezza quando è installato) |
4,5 mm |
| P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
| B (thread depth with chamfer) |
6,25 mm |
| D (minimum depth of the core hole, without tip) |
6,75 mm |