BAER HSSG Bit Tap M 5 x 0.8
In stock
Express shipping available
BAER HSSG Bit Tap M 5 x 0.8
BAER Bit taps are designed for thread cutting with cordless screw drivers and hand drilling machines with clockwise and anti-clockwise rotation. However, they are also suitable for thread cutting by hand and on stationary drilling machines. Your cordless screw driver should have a power of at least 7.5 volts. Make sure that the tool axis and hole axis are exactly aligned and use a suitable cutting oil. For thread cutting with cordless screw drivers and hand drillig machines, we recommend the lowest speed settings (0 - 450 rpm) and maximum torque settings.
Dimensions
| Diameter |
5 |
|---|---|
| Nominal diameter in inches |
0,197 |
| Nominal diameter in mm |
5 |
| Pitch |
0,8 |
| Pitch in mm |
0,8 |
| Dimension |
M 5 x 0,8 |
Characteristics
| Product group |
Screw taps |
|---|---|
| Product type |
Bit taps/Combined bit taps |
| Thread standard |
M: Metric ISO standard thread according to DIN 13 |
| Tolerance |
ISO2/6H |
| Direction |
Right |
| Standard |
Factory standard |
| Tensile strength at room temperature |
up to 900 N/mm² | 27.1 HRC |
| Material |
HSSG bright |
Technical information – Screw taps
4.2 mm
Through hole and blind hole up to 2 x D
Form D straight fluted
3.5-5 threads
Rarely occurs. Chips remain in flutes.
External cooling and lubrication
HSSG bright
up to 900 N/mm² | 27.1 HRC
ISO2/6H
Applications
Steel, non-ferrous metals and plastics up to 600 N/mm² tensile strength
Examples of applications
- Bicycle thread M5 for rope clamp
Technical drawing
| D1 |
M 5 x 0,8 |
|---|---|
| L1 |
36 mm |
| L2 |
15 mm |
| Diameter |
5 |
Further information
- M - Metric ISO thread DIN 13
- Designations, geometries and definitions on taps
- Thread tolerances of the internal thread
- Internal thread and core hole dimensions
- Tap Chamfer forms
- Comparison inch-mm
- Surface treatments on tapping tools
- Cutting speeds and lubrication/cooling
- Information about tapping
- Material table
Safety instructions
Login
Zubehör
